Correct operating approach not only improves manganese ore powder briquetting machine's production efficiency and reduces failures, but also strengthens its durability to a large extent. So it is very necessary to let users grasp and understand these precautions in advance.

After the pressure has up to standard, manganese ore powder briquetting machine can be fed with materials. After manganese ore powder briquetting machine has running for 3 to 5 minutes, only then can we start to feed and after stirring the materials for 20 to 30 seconds, it's time to suppress. During the suppressing press of materials, we must make sure that raw materials are added adequately, and properly control the pressing pressure and other molding factors.

Through appropriately adjusting the suppressing parameters, it can ensure manganese ore powder briquetting machine working smoothly. When it is operating, we should pay attention to the correct use of this equipment and the accurate adjustment of burdening. When the production is finished, we should close down the briquette machine and clean the supporting blender and various kinds of accessory equipment. After the cleaning, we should turn off all the valves and switches. If any abnormal situation occurs, please cut off the power supply immediately and remove materials. The manganese ore powder briquetting machine should be sent to the technical personnel for repair and troubleshooting in a timely manner, after having been ensured undamaged.

In terms of maintenance, we should conforming to the briquetting machine manufacturer's advice and methods as far as possible to carry out, and form a good habit, by testing and maintaining the equipment at regular intervals.